
The lifeline of every modern home is its HVAC system. It keeps your home cool in summers and warm in winters. But everybody is not that lucky. Some of us make costly mistakes while installing the HVAC system, and these eat into our carefully planned finances. To ensure that you don’t make these very same mistakes, we are taking the initiative to warn you about them.
5 Common And Costly HVAC Installation Mistakes
1. Choosing An Inappropriate Contractor – Yes, we understand that you want to shave off extra and unwarranted expenses. However, don’t do so at the cost of choosing the right contractor. An inexperienced contractor will definitely be cheap. His reputation, quality of work, and advice everything will be substandard and questionable. If you are really unlucky, they will do more damage to your HVAC system and add to your list of mounting expenses. An experienced contractor does not come cheap. His knowledge and understanding of the finer points of HVAC is par excellence. A knowledgeable and experienced contractor will never let you down. They are skilled in taking care of all your HVAC needs, and you are sure to benefit from their advice. In the long run, with their help, you will be able to keep your repair and maintenance costs to a minimum.
2. Purchasing An Incorrectly Sized System – When it comes to central heating and cooling systems, there is no one size that fits all. In fact, before purchasing a new HVAC unit, you should get your home inspected by an HVAC contractor so that they can tell you the best size of HVAC for your home. If you land up buying a unit that is small, it will never heat and cool your home appropriately. However, if you buy an oversized unit, it will add to your utility bills by constantly cycling on and off. Both of these mistakes are expensive. The only way to correct them is by purchasing yet another AC that is sized for your home.
3. Choosing The Wrong Installation Location – The location of the outdoor unit has a significant bearing on how well the heating and cooling system works. You can stick it between bushes or case it between cemented walls so that it does not stick out. All that this camouflaging will do is restrict the air that the system breathes in. When the air entering the system is not proper, it will not push in the appropriate amount of cool or warm air into your home. In the same way, you cannot install the unit in an area that receives direct sunlight throughout the day. You need to install the compressor unit in a shaded area that is open and has no restrictions in the form of bushes and such.
4. Constantly Running The AC – In most homes, the kids go to school and the adults to works. There are a couple of hours in the day when nobody is home, and yet the heating and cooling system works without any change. It just adds to your utility bills and does not in any way add to the comfort of either yourself or your family. Add these days together, and you will realize that more than half the year, your HVAC runs for no good reason. It amounts to quite a considerable sum. Before leaving home, you should increase the temperature on the thermostat, or you should shut down the AC. Both these options will save you a lot of money and also decrease your carbon footprint. If you think that everyday fiddling with the thermostat is troublesome, you can invest in a programmable thermostat. This way, whatever settings you program, your thermostat will accordingly send signals to the HVAC system.
5. Setting The Thermostat Too High Or Too Low – Most of us think that setting the temperature too low or too high will cool or warm the house faster. This is simply a misconception. Irrespective of the temperature setting, the unit will still function in the usual manner and pump in the air at the same rate. The result of extreme settings is that it puts your unit under tremendous strain, and very soon, you have to switch the temperature back to normal else you home will become either too chilly or hot. Every time your system works under stress, it consumes a lot of power, making for higher energy bills. Instead, try changing the fan settings to help your HVAC system reach the desired cooling quickly and more efficiently.
Few Other HVAC Installation Mistakes That Cost Money
Here are a few other HVAC installation mistakes that can prove to be costly on your pockets:
1. Neglecting to periodically change the air filters puts the heating and cooling system under pressure, thereby increasing your utility bills.
2. Keeping your windows open to let in the sunlight or a little breeze will prevent your home from reaching the desired temperature, and your unit will work constantly to try and achieve it.
3. Skipping the HVAC maintenance and ignoring any budding troubles within the system will also cost you dearly when they escalate into more significant and costlier problems.
4. Poor insulation will also prevent your home from reaching a comfortable temperature. The heating and cooling system will work continuously and still be unable to satisfy you. The electricity bill keeps mounting, and you see no end to the needless expense.
Concluding Thoughts
First and foremost, get hold of an experienced and reputable HVAC contractor. He will always guide you in the correct direction. Next, in case you are upgrading or buying your first HVAC, get your home duly sized by the contractor to know the exact capacity of your intended new ac equipment. Once the HVAC installation is done, see to its periodic maintenance and regular changing of the air filters. Refrain from committing the mistakes, as mentioned above. If you succeed in doing so, you will not only do your finances a favor but also extend the life expectancy of your heating and cooling system.
If you have any queries or concerns, you can contact the elite team of professionals at Aztil AC by calling +1-888-729-8452.